Item Description

【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother and homogeneous. The low shrinkage and stable printing dimensions make the fusion between layers very good for even better-bridging results. You won't worry the diameter changes drastically, disrupting feed rate with thicker and thinner layers 【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neatly wound on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super-consistent extrusion. It produces the cleanest, least stringing prints while resisting warping and providing the glossiest finish. Without a single jam and with excellent adhesion which meets your demands for printing freely 【𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞】 Designed and manufactured with clog-free technology to ensure smooth, stable printing with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enables much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother 【𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲】 Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and does not require a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament is compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market 【𝐅𝐢𝐥𝐚𝐦𝐞𝐧𝐭 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】 1. Install the spool on the spool holder of a 3D printer and preheat the nozzle. 2. Cut the filament tip diagonally and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle until the filament melts through

About the Seller

@davidcoll440

New seller

📍 Omaha, US

Member since 2024